Why Does My Infrared Heater Keep Shutting Off?
If you have an infrared heater and you are having trouble with it, one of the first things you need to check is the thermostat. If it is broken, the temperature of the house may drop and you will find your infrared heater shutting off. Another problem with an infrared heater is the heating element. This can be caused by an empty propane or natural gas tank or by the valve being closed.
Problems with the thermostat
If your infrared heater keeps shutting off, it might be due to an overheating problem. The temperature gauge might not be working or there might be a loose wire connection. These are all common problems with infrared heating systems. Here are some tips for getting yours back up and running.
First, unplug the power cord from the unit. You might also need to reset the thermostat. It is easy to do. This is a simple procedure that requires you to hold down the main button of your switch for a few seconds.
After doing this, you should check the control knob for loose connections. There may also be a loose wire connection in the primary controller.
A thermostat is a great way to set the correct temperature for your room. However, it can also be a source of trouble.
Faulty heating elements
The heating elements in an infrared heater are made up of different parts. Several of these may be faulty. This causes the heater to malfunction and shut off. However, this is not a very difficult problem to fix.
Using a vacuum cleaner to clean the vents can be helpful. If there is dirt buildup in the vents, this can prevent the smooth flow of heat. Also, cleaning the front grill can help keep the unit free of debris.
Another common cause for an infrared heater to shut off is a faulty thermostat. When the thermostat is not working properly, it cannot regulate the temperature inside the unit. For this reason, it is recommended to replace the thermostat.
An infrared heater may also malfunction because of a broken power cord. You should check the plug and socket before you start using the unit.
Propane or natural gas tanks are empty or the valve is closed
A lack of propane flow can lead to problems with a variety of appliances and equipment. To get a handle on this issue, you’ll want to identify the cause and find a solution.
Depending on your system, you’ll need to perform some different steps. The first step is to check your tank level. Some propane tanks come with gauges. If yours doesn’t, you can buy a gauge.
You’ll also want to check for leaks. This is a particularly important step if your tank is underground. Once you’ve confirmed there is no leak, you’ll need to open up the valve on the tank.
To do this, you’ll need a crescent wrench. Place it over the large nut on the gas regulator of the tank. Twist it clockwise to loosen the connection.
Improper plug connection or inadequate power supply
When your infrared heater is shutting off, you need to look for the source of the problem. Sometimes the heater is not getting enough power. Or it may be plugged into an outlet that does not have a good connection. It is also possible that you have a broken control switch.
If you have checked the wiring and power supply, and the issue remains, you might need to look at the thermostat. Many of these heaters have a built-in safety overheating system that automatically turns the unit off.
Infrared heaters also have a temperature gauge. This is a great feature. However, if the temperature is too high, it can cause the heater to overheat. Typically, the temperature gauge should be set at a level that allows the user to feel comfortable.
Repairing an infrared heater
If you have an infrared heater that keeps shutting off, there are several problems you can check for. Some of the issues you may experience are a malfunctioning thermostat, a power supply problem, or a loose connection.
Infrared heaters are very useful heating appliances, especially in colder countries. But as with any electrical device, you must make sure that the electrical path is in good condition. You can check the connection between the plug and the socket, and the wiring inside the heater.
Other problems with an infrared heater include a broken power cord, an overheating unit, a faulty thermostat, or a blocked vent. Depending on the issue, it may need professional repair or even replacement.
First, you should check for a loose connection. It can happen when a socket or plug becomes worn out. A loose connection causes heat to build up and eventually causes your infrared heater to overheat.
